Cricut Cut Settings Guide (HTV, Vinyl + Troubleshooting Tips Australia)
If you have ever sat at your craft table wondering 'Why is my vinyl not cutting properly?" You are not alone - and this guide is here to help!
Getting your cut settings right can be the difference in a smooth weeding/transfer experience and wanting to chuck your machine in the bin along with your vinyl.
The good news? Once we master these basics your vinyl will be weeding as smooth as butter. In this guide we will be covering:
- Recommended Cricut cut settings
- Tips for working with HTV and Adhesive vinyl
- Common problems - and how to fix them.
What affects your cut settings?
Before we jump into the cut settings table, it is important to know what can affect the cut settings on your Cricut machine.
- Your machine - There may be a difference in settings on an Explore, Maker, Joy etc
- Blade condition - A dull blade will result in messy cuts
- Material type - Not all vinyl is created equal
- Pressure settings
This is why a test cut can prevent headaches further down the track, make sure you are performing these on each project.
💡 We use and recommend TeckWrap vinyl for smooth cutting and easy weeding — perfect for beginners and small biz crafters. The cut settings below are for what products are stocked in our online store.
Cricut cut settings chart.
This is a starting point for your cuts, make sure you are always performing a test cut.
| Material | Cricut Cut Settings | Notes |
| HTV | ||
| Standard (PU) HTV | Everyday Iron-on | Mirror |
| Glitter Puff HTV | Glitter Iron-on | Mirror |
| Metallic Pearlescent HTV | Everyday Iron-on | Mirror |
| Sublimation HTV | Everyday Iron-on | Mirror |
| Soft Holographic HTV | Everyday Iron-on | Mirror |
| Metallic Chrome HTV | Premium Vinyl - Textured Metallic | Mirror |
| Puff HTV | Glitter Iron-on | Mirror |
| Reflective HTV | Holographic/Reflective | More Pressure - Mirror |
| Glitter HTV | Glitter Iron-on |
Mirror |
|
ADHESIVE |
||
| Mirror Chrome | Premium Vinyl | Remove protective plastic |
| 001G | Premium Vinyl | Remove protective plastic |
| Holographic | Premium Vinyl - Holographic | Remove protective plastic |
| Candy | Premium Vinyl | |
| Rainbow Stripe | Glitter/shimmer vinyl | |
| Holo Hearts | Premium Vinyl - Holographic | |
| Pearl | Premium Vinyl - Textured Metallic | More Pressure |
| Gradient Confetti | Premium Vinyl - Textured Metallic | |
| Glow in the Dark | Premium Vinyl | Remove protective plastic |
| Holographic Glass Flower | Premium Vinyl - Holographic | |
| 001E | Premium Vinyl | Remove protective plastic |
| Brush | Premium Vinyl - Frosted Glitter | High Tack transfer tape |
Common Cricut problems (and how to fix them)
'My vinyl isn't cutting all the way through'
- Increase pressure slightly
- Check your blade (it may need replacing)
- Make sure your material is flat on the mat - Use a brayer or squeegee to help with this
'My Cricut is cutting too deep'
- Reduce pressure
- Double check your material setting
- Try a test cut before your full design
'My HTV is lifting when I weed'
- Your cut may be too shallow
- Slow down when weeding your materials
- Use high-quality HTV (this makes a HUGE difference)
Pro tips for better results.
- Always do a test cut when using new material
- Keep your blade clean and sharp - replace when required
- Store vinyl flat to avoid bubbles and lifting
- Use quality vinyl - it honestly makes crafting so much easier
Ready to start your next project?
If you are looking for vinyl that cuts smoothly and weeds easily without the frustration we've got you covered.
Shop our range of Teckwrap vinyl and craft supplies
Fast shipping Australia wide + local pick up available in South Australia
Final Tips
Don't stress if it takes a few tries to get your settings right, we have all been there. The more you practice, the more confident you'll feel... and before you know it, you'll be cutting like a pro.
Thanks for reading! If you have any questions, please email us at admin@vibrantvinylco.com.au
Sarah
